Saltar al contenido principal
Ayuda

Hot Wheels AI Intelligent Race System Controller Batteries Replacement

This is a step by step guide on how to replace the batteries on the device's controller.

  • Autor: Peter Nguyen
  • Tiempo estimado: 1 minuto
  • Dificultad: Fácil

If your Hot Wheels AI controller does not turn, try replacing the battery. This guide will assist you if you have any trouble. Before you begin, you will need three brand new AAA batteries and a J0 screwdriver. The steps should be straightforward and fast! Once you replace your battery, you will be racing in no time!

Herramientas

Paso 1 Controller Batteries  ¶ 

Use a JIS #0 screwdriver to unscrew the single battery cover screw.

Paso 1 Controller Batteries  ¶ 

  • Use a JIS #0 screwdriver to unscrew the single battery cover screw.

Paso 2  ¶ 

Remove the old AAA battery from the slot by pressing down on the positive end. Do the same for the other two. Make sure none of the battery slots are damaged.

Paso 2  ¶ 

  • Remove the old AAA battery from the slot by pressing down on the positive end.

  • Do the same for the other two. Make sure none of the battery slots are damaged.