Saltar al contenido principal
Ayuda

Toshiba Satellite C55-A5310 Fan Replacement

Mejor introducción

Mejor introducción

Mejora esta guía completando o revisando su introducción.

How to replace a fan in a Toshiba Satellite C55-A5310.

  • Autor: Robin
  • Tiempo estimado: 10 minutos
  • Dificultad: Moderar
Secciones
Herramientas
Herramientas (continuación)

Paso 1 Fan  ¶ 

Take a nylon spudger and push the prongs so that it releases the RAM. Take a nylon spudger and push the prongs so that it releases the RAM.

Paso 1 Fan  ¶ 

  • Take a nylon spudger and push the prongs so that it releases the RAM.

Paso 2  ¶ 

Once the RAM has lifted, use tweezers or fingers to pull it out.

Paso 2  ¶ 

  • Once the RAM has lifted, use tweezers or fingers to pull it out.

Paso 3  ¶ 

Remove the single .5mm JIS #000 screw. Remove the single .5mm JIS #000 screw.

Paso 3  ¶ 

  • Remove the single .5mm JIS #000 screw.

Paso 4  ¶ 

Use the plastic opening tool to remove the keyboard from the laptop.

Paso 4  ¶ 

  • Use the plastic opening tool to remove the keyboard from the laptop.

Paso 5  ¶ 

Once the keyboard is popped out, use a spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop. Once the keyboard is popped out, use a spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.

Paso 5  ¶ 

  • Once the keyboard is popped out, use a spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.

Paso 6  ¶ 

Remove thirteen JIS #000 11mm screws.

Paso 6  ¶ 

  • Remove thirteen JIS #000 11mm screws.

Paso 7  ¶ 

Use a nylon spudger tool to lift up on all sides. Once the panel has been loosened it will pop off.

Paso 7  ¶ 

  • Use a nylon spudger tool to lift up on all sides.

  • Once the panel has been loosened it will pop off.

Paso 8  ¶ 

Remove five 11mm JIS #000 screws.

Paso 8  ¶ 

  • Remove five 11mm JIS #000 screws.

Paso 9  ¶ 

Remove the four wires with tweezers. Remove wires gently to avoid damaging them. Remove wires gently to avoid damaging them.

Paso 9  ¶ 

  • Remove the four wires with tweezers.

  • Remove wires gently to avoid damaging them.

Paso 10  ¶ 

Lift from corresponding sides of the fan and it'll pop right out.

Paso 10  ¶ 

  • Lift from corresponding sides of the fan and it'll pop right out.