Saltar al contenido principal
Ayuda

Dell XPS M1730 Keyboard Replacement

Mejor introducción

Mejor introducción

Mejora esta guía completando o revisando su introducción.

This guide is to show comprehensive steps to remove and replace the QWERTY keyboard on the Dell XPS M1730 laptop.

  • Autor: Nikki Meyer
  • Tiempo estimado: 5 minutos
  • Dificultad: Fácil

Paso 1 Keyboard  ¶ 

Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side. Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side. Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side.

Paso 1 Keyboard  ¶ 

  • Remove the plastic trim at the base of the screen screen. Start from the tab on the right side and work to the left side.

Paso 2  ¶ 

Remove the four screws from the top of the keyboard bracket. Remove the four screws from the top of the keyboard bracket.

Paso 2  ¶ 

  • Remove the four screws from the top of the keyboard bracket.

Paso 3  ¶ 

Remove the keyboard by sliding it forward, off of the clips, and then lifting up. Remove the keyboard by sliding it forward, off of the clips, and then lifting up. Remove the keyboard by sliding it forward, off of the clips, and then lifting up.

Paso 3  ¶ 

  • Remove the keyboard by sliding it forward, off of the clips, and then lifting up.

Paso 4  ¶ 

Lift the keyboard about 2 inches up from the laptop platform. From this angle the keyboard ribbon connector can be seen and disconnected. From this angle the keyboard ribbon connector can be seen and disconnected.

Paso 4  ¶ 

  • Lift the keyboard about 2 inches up from the laptop platform.

  • From this angle the keyboard ribbon connector can be seen and disconnected.