Saltar al contenido principal
Ayuda

Xbox 360 Wireless Speed Wheel Left and Right Triggers Replacement

This guide will show how to replace the left and right triggers on the back of the Xbox 360 Wireless Speed Wheel

  • Autor: ines said
  • Tiempo estimado: 40 minutos
  • Dificultad: Difícil

Similar to the buttons, triggers can break during hardcore gaming or could lose functionality due to sticky and gooey substances (eg. food). In this guide, you will learn how to replace the left and right triggers of the controller. This guide involves opening the controller.

Paso 1 Left and Right Triggers  ¶ 

Use a T6 Torx screwdriver to remove the four 2.3mm screws. Lift up the black locking tab on the ZIF connector to release the ribbon cable. Lift up the black locking tab on the ZIF connector to release the ribbon cable.

Paso 1 Left and Right Triggers  ¶ 

  • Use a T6 Torx screwdriver to remove the four 2.3mm screws.

  • Lift up the black locking tab on the ZIF connector to release the ribbon cable.

Paso 2  ¶ 

Lift up the trigger to remove it from the controller.

Paso 2  ¶ 

  • Lift up the trigger to remove it from the controller.

  • The trigger is made up of three pieces: the trigger, a circuit board, and a ribbon cable.

  • Repeat for the other trigger.