Saltar al contenido principal
Ayuda

Dell Alienware 13 R3 Display Bezel Replacement

Guía Contribuida Por Miembros

Guía Contribuida Por Miembros

Un miembro increíble de nuestra comunidad escribió esta guía. No está supervisada por el personal de iFixit.

Ruta Pintoresca

Ruta Pintoresca

El procedimiento de esta guía no es la manera más eficiente para hacer el trabajo, pero todavía puede ser útil en algunas circunstancias.

Removal and replacement of the display bezel for the Dell Alienware 13 R3.

In this guide, we will show you how to remove and replace the Display Bezel.

Secciones (continuación)

Paso 1 Prying the Inside Edges  ¶ 

No hay imagen

Paso 1 Prying the Inside Edges  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Using your fingertips, carefully pry up the inside edges of the display bezel.

Paso 2 Lift the Display Bezel  ¶ 

Carefully lift the display bezel and turn it over.

Paso 2 Lift the Display Bezel  ¶ 

  • Carefully lift the display bezel and turn it over.

Paso 3 Disconnect the Alien Head Logo  ¶ 

Open the latch and disconnect the alien head logo-board cable from the logo board.

Paso 3 Disconnect the Alien Head Logo  ¶ 

  • Open the latch and disconnect the alien head logo-board cable from the logo board.

Paso 4 Peeling the Tape  ¶ 

Peel off the tape that secures the logo-board cable to the logo board and disconnect the logo-board cable from the logo board.

Paso 4 Peeling the Tape  ¶ 

  • Peel off the tape that secures the logo-board cable to the logo board and disconnect the logo-board cable from the logo board.

Paso 5 Lift the Display Bezel  ¶ 

Lift the display bezel off the display assembly.

Paso 5 Lift the Display Bezel  ¶ 

  • Lift the display bezel off the display assembly.

Paso 6 Place the Display Assembly  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Paso 6 Place the Display Assembly  ¶ 

Paso 7 Connect the Logo-Board  ¶ 

No hay imagen

Paso 7 Connect the Logo-Board  ¶ 

  • Connect the logo-board cable to the logo board.

Paso 8 Adhering the Tape  ¶ 

Adhere the tape that secures the logo-board cable to the logo board.

Paso 8 Adhering the Tape  ¶ 

  • Adhere the tape that secures the logo-board cable to the logo board.

Paso 9 Slide the Logo Board Cable  ¶ 

Slide the alien head logo-board cable into the logo board and close the latch to secure the cable.

Paso 9 Slide the Logo Board Cable  ¶ 

  • Slide the alien head logo-board cable into the logo board and close the latch to secure the cable.

Paso 10 Turn the Display Bezel Over  ¶ 

No hay imagen

Paso 10 Turn the Display Bezel Over  ¶ 

  • Carefully turn the display bezel over.

Paso 11 Align the Bezel  ¶ 

Align the display bezel with the display back-cover and antenna assembly and gently snap the display bezel into place.

Paso 11 Align the Bezel  ¶ 

  • Align the display bezel with the display back-cover and antenna assembly and gently snap the display bezel into place.