Saltar al contenido principal
Ayuda

eMac Optical Drive Removal

Guía Contribuida Por Miembros

Guía Contribuida Por Miembros

Un miembro increíble de nuestra comunidad escribió esta guía. No está supervisada por el personal de iFixit.

Steps to follow if you'd like to replace or upgrade the optical drive in your eMac.

  • Autor: Chris Green
  • Tiempo estimado: 15 - 30 minutos
  • Dificultad: Fácil

Steps to follow if you'd like to replace or upgrade the optical drive in your eMac.

Paso 1 Cable Removal  ¶ 

The eMac uses a standard 5.25" IDE optical drive. Most off-the-shelf drives should work as a replacement with minor modification. The jumper setting for the drive should be "CS". Start by disconnecting the IDE and power cables from the drive.

Paso 1 Cable Removal  ¶ 

  • The eMac uses a standard 5.25" IDE optical drive. Most off-the-shelf drives should work as a replacement with minor modification. The jumper setting for the drive should be "CS".

  • Start by disconnecting the IDE and power cables from the drive.

Paso 2 Screw Removal  ¶ 

The drive is held in by two phillips #2 screws on each side. Remove these. The drive is held in by two phillips #2 screws on each side. Remove these.

Paso 2 Screw Removal  ¶ 

  • The drive is held in by two phillips #2 screws on each side. Remove these.

Paso 3 Drive Removal  ¶ 

The drive should now come free. The drive should now come free.

Paso 3 Drive Removal  ¶ 

  • The drive should now come free.