Repara tus cosas Comunidad Tienda

dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement

Introducción

This is how you replace the internal ribbon power cord.

Qué necesitas

  1. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Prerequisite Guide to Accessing Interior: paso 1, imagen 1 de 2 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Prerequisite Guide to Accessing Interior: paso 1, imagen 2 de 2

    • Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

    Editar

  2. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 2, imagen 1 de 2 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 2, imagen 2 de 2

    • Remove the six 2 mm PH0 screws on the bottom of the device.

    • Four of those screws are located under the foot pads.

    Editar

  3. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 3, imagen 1 de 1

    • Gently remove the bottom of the device.

    Editar

  5. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Mother Board: paso 4, imagen 1 de 2 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Mother Board: paso 4, imagen 2 de 2

    • Remove the four 1.8 mm J1 screws.

    • Remove the two 2mm PH0 screws.

    Editar

  6. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 5, imagen 1 de 1

    • Gently pick up the mother board

    • Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

    Editar

  7. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 6, imagen 1 de 2 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 6, imagen 2 de 2

    • Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

    Editar

  8. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Power Board: paso 7, imagen 1 de 2 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Power Board: paso 7, imagen 2 de 2

    • Remove the four 1.8 mm PH0 screws that are holding the board in.

    • When you remove these screws, the plastic cups inside the PS Move stations will fall out.

    Editar

  9. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 8, imagen 1 de 1

    • Pick up the board.

    • Pick the board straight up, or you risk damaging the charging ports.

    Editar

  10. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: paso 9, imagen 1 de 1

    • Using a plastic opening tool or a similar tool, gently pry the power ribbon cord out of its port.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Jacob

Miembro Desde 03/11/15

757 Reputación

6 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

Colorado Springs, Team 4-4, Panko Spring 2015 Miembro de Colorado Springs, Team 4-4, Panko Spring 2015

UCCS-PANKO-S15S4G4

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 196