Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Parvathy Nambidi —

Edicion aprobada por Parvathy Nambidi

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Close the laptop, and open the front display. Locate the two front screw covers, on the left and right side base of the display panel.
-[* orange] Remove the front screw covers, using the black plastic spudger.
-[* yellow] Remove the two front screws holding the back cover in place, just above the hinges, using a Phillips #01 Screwdriver.
+[* red] Close the device and turn it right side up. Locate the two screw covers on the left and right side base of the display panel.
+[* orange] Remove the screw covers, using the black plastic spudger.
+[* yellow] Remove the two 3.0 mm Phillips-front screws holding the back cover in place, just above the hinges, using a Phillips #1 screwdriver.