Saltar al contenido principal

Cambios a este Paso

Editado por Miranda Laberge

Edicion aprobada por Miranda Laberge

Antes
Después
Sin cambios

Líneas de Paso

[* black] To clean the filters, rinse the pre-filter and HEPA filter under running water.
[* black] Tap the debris out of each filter using the side of the sink or your hand. Repeat this step until all of the debris is removed.
[* black] Make sure to squeeze excess water out of the pre-filter.
[* black] Allow for each filter to dry for a full 24 hours in a sunny spot, before replacing back into the device.

Videos