Cambios al paso #5
Editado por Parvathy Nambidi —
Edicion aprobada por Parvathy Nambidi
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Move the ribbon cable to the side. Use the flat end of a |
|---|---|
| + | [* red] Move the ribbon cable to the side. Use the flat end of a spudger to disconnect the battery cable from its socket in the logic board. |
| [* black] Locate the battery and the three 4.00 mm Phillips-head screws that hold it in place. | |
| [* green] Unscrew and remove the three screws. | |
| [* black] Lift the battery up and remove. | |
| [* icon_caution] Removing the battery can dislodge the touchpad bracket. Place it carefully over the alignment pins. |