Saltar al contenido principal

Cambios a Paso #4

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] In the next few steps, you will desolder the three battery solder joints on the logic board.
[* icon_note] Prior to desoldering the 3 leads, there may be some silicon/glue covering them. Remove as much as possible with a plastic or metal spudger (if metal, be extremely careful not to bridge the connections) before applying soldering tip to points.