Saltar al contenido principal

Cambios a Paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Grip the copper shield located on the bottom of the battery with one hand while firmly holding the battery with the other.
[* black] Carefully peel the copper shield up off the battery.
[* icon_caution] Do not rapidly peel the copper shield. Doing so may cause irreversible damage to the battery.
[* black] Important!icon_note] When You will installinstalling a new batterybattery, the copper shield must be as smoothflat as possible. Otherwise the thicknessruffled shield will increaseadd to the thickness of the battery will puff out and LCD won't joint the body closelycombined.
[* black] Important!icon_note] When You will installinstalling a new batterybattery, the copper shield must be as smoothflat as possible. Otherwise the thicknessruffled shield will increaseadd to the thickness of the battery will puff out and LCD won't joint the body closelycombined.