Saltar al contenido principal

Cambios a este Paso

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereOnce all of the adhesive is freed from under the logic board/battery assembly, lift the assembly up from the side and carefully rotate it over to access the underside of the battery.
[* icon_caution] The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable
.
[* black] Insert wisdom hereOnce all of the adhesive is freed from under the logic board/battery assembly, lift the assembly up from the side and carefully rotate it over to access the underside of the battery.
[* icon_caution] The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable
.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Ninguna imagen anterior

Añadido