Saltar al contenido principal

Cambios a este Paso

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereWith a plastic opening tool, carefully push the dock connector out of its outer case recess. Work each corner evenly until the connector comes free.
[* icon_caution] Since the dock connector is attached to the logic board, pushing it out of the case may cause the logic board to begin to flex. Take extra care not to permanently warp the board
.
[* black] Insert wisdom hereWith a plastic opening tool, carefully push the dock connector out of its outer case recess. Work each corner evenly until the connector comes free.
[* icon_caution] Since the dock connector is attached to the logic board, pushing it out of the case may cause the logic board to begin to flex. Take extra care not to permanently warp the board
.

Imagen 3

Eliminado