Saltar al contenido principal

Cambios a este Paso

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereAfter the edges of the battery are loosened, begin prying up the edge of the logic board. Start at the top and work your way down the side of the board.
[* icon_caution] To prevent bending/breaking the logic board, do not try to remove the logic board, yet. The dock connector is still embedded in the frame. Again, you are only trying to loosen more of the adhesive
.
[* black] Insert wisdom hereAfter the edges of the battery are loosened, begin prying up the edge of the logic board. Start at the top and work your way down the side of the board.
[* icon_caution] To prevent bending/breaking the logic board, do not try to remove the logic board, yet. The dock connector is still embedded in the frame. Again, you are only trying to loosen more of the adhesive
.