Saltar al contenido principal

Cambios a este Paso

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_caution] In the next few steps, you will loosen the adhesive from underneath the battery, the logic board, and the frame under the battery. Do this slowly, carefully, and evenly. Take care not to puncture the battery or bend the logic board.
[*
black] Insert wisdom hereUse a plastic opening tool to pry up the adhesive around the three exposed edges of the battery.
[* icon_note] Do not try to pry the battery out, just start loosening the adhesive
.
[* icon_caution] In the next few steps, you will loosen the adhesive from underneath the battery, the logic board, and the frame under the battery. Do this slowly, carefully, and evenly. Take care not to puncture the battery or bend the logic board.
[*
black] Insert wisdom hereUse a plastic opening tool to pry up the adhesive around the three exposed edges of the battery.
[* icon_note] Do not try to pry the battery out, just start loosening the adhesive
.