Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Alec Soto —

Edicion aprobada por Alec Soto

Antes
Después
Sin cambios

Líneas de Paso

-[* black] After removing the cover the mSATA SSD should be visible near the center of the device.
-[* black] Remove the one Phillips 2.5mm screw holding the SSD in place. The drive should pop up after removing the screw.
+[* icon_note] After removing the cover the mSATA SSD should be visible near the center of the device.
+[* red] Remove the one Phillips 2.5mm screw holding the SSD in place. The drive should pop up after removing the screw.