Saltar al contenido principal

Cambios a Paso #7

Editado por garegin

Edicion rechazada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove four out of the six 5.3 mm T8 Torx screws securing the display to the upper case.
[* icon_note] We purposely have you leave two screws attaching the display to the upper case to aid in future steps.
[* black] On the right side, the antenna cable has two ground tabs corresponding to the screwholes on the base. Make sure that the two tabs are held and go under those two screws.