Saltar al contenido principal

Cambios al paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] Rotate the device 180 degrees to more easily access the rest of the internal components.
[* red] Remove the two 2.5 mm T5 Torx screws securing the power adapter in placeMagSafe DC-In board to the upper case.
[* black] Slide the adapter toMagSafe DC-In board towards the right to free it from its recess within the outer case, then lift it away fromupper case.
[* black] Lift and remove the MagSafe DC-In board out of
the deviceupper case assembly.
[* red] Remove the two 2.5 mm T5 Torx screws securing the power adapter in placeMagSafe DC-In board to the upper case.
[* black] Slide the adapter toMagSafe DC-In board towards the right to free it from its recess within the outer case, then lift it away fromupper case.
[* black] Lift and remove the MagSafe DC-In board out of
the deviceupper case assembly.