Saltar al contenido principal

Cambios al paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the following eight T5 Torx screws:
[*
screws securing the heat sink to the logic board:
[*
red] Two 2.4 mm T5 screws
[* orange] Six 3.4 mm T5 screws
[* black] Remove the following eight T5 Torx screws:
[*
screws securing the heat sink to the logic board:
[*
red] Two 2.4 mm T5 screws
[* orange] Six 3.4 mm T5 screws
[* black] Grip both ends of the heat sink and lift it up from the logic board.
[* icon_note] When installing the new heat sink, do not forget to replace the thermal paste underneath the heat sink.