Saltar al contenido principal

Cambios al paso #1

Editado por Brittany McCrigler

Edicion aprobada por Brittany McCrigler

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the following eight T5 Torx screws:
[* red] Two (2) 2.4 mm
[* orange] Six (6) 3.4 mm
[* red] Two (2) 2.4 mm
[* orange] Six (6) 3.4 mm
[* black] Grip both ends of the heat sink and lift it up from the logic board.
[* icon_note] When installing the new heat sink, do not forget to replace the thermal paste underneath the heat sink.