Saltar al contenido principal

Cambios al paso #23

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Insert wisdom here.
+[* black] Grab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
+[* icon_reminder] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip located on the underside of your logic board as well as its copper heat sink attached to the midplane.
+[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap.

Imagen 2

Ninguna imagen anterior

Añadido