Skip to main content

Changes to Step #7

Editado por Miroslav Djuric

Edicion aprobada por Miroslav Djuric

Borrada
Añadida
Sin cambios

Step Lines

[* black] Insert wisdom herePut the assembly back into place (without screwing it in), and verify that the actuator pole hits the screws at a good location.
[* black] Adjust the length of screws if needed.
[* black] Put everything back together in reverse order, including all the screws you took out
.
[* black] Insert wisdom herePut the assembly back into place (without screwing it in), and verify that the actuator pole hits the screws at a good location.
[* black] Adjust the length of screws if needed.
[* black] Put everything back together in reverse order, including all the screws you took out
.