Saltar al contenido principal

Cambios al paso #2

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Sin cambios

Líneas de Paso

[* red] Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield.
[* icon_note] If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.

Imagen 2

Ninguna imagen anterior