Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por iRobot

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Carefully lift the logic board up and pull it away from you.
[* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors.
[* icon_note] On 800 MHz and above G4s, you must disconnect the fan cable from the logic board before you lift the board entirely off.

Imagen 1

Ninguna imagen anterior

Añadido