Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por CaptFrost

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Disconnect the 5 indicated connectors from the logic board, removing tape as necessary.
[* black] '''Reassembly Tip:''' Reseating the logic board will be much easier if you use kapton tape to hold these five connectors out of the way until it is in place.
[* black] '''Caution:''' If taping the connectors back, be careful not to use tape with anything but very weak adhesive (i.e. kapton tape). Even electrical tape can pull the paint off the hinges when removed.