Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #3

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Move the AirPort board bracket towards the bottom of the display case with the tip of a spudger so that it does not block the AirPort board cable.
[* black] Use the tip of a spudger to disconnect the AirPort board cable by rocking it back and forth until it is free.
[* black] Note!icon_caution] The AirPort board connection cable can be inserted both ways. The two sides of the connector look slightly different. Inserting'''However,''' inserting it upside down will cause a short circuit upon power on and damage the logic board and / orand/or Airport board, so be careful to note the correct orientation.
[* black] Note!icon_caution] The AirPort board connection cable can be inserted both ways. The two sides of the connector look slightly different. Inserting'''However,''' inserting it upside down will cause a short circuit upon power on and damage the logic board and / orand/or Airport board, so be careful to note the correct orientation.