Saltar al contenido principal

Cambios al paso #4

Editado por gordonhamachi

Edicion aprobada por gordonhamachi

Antes
Después
Sin cambios

Líneas de Paso

-[title] Remove the Keyboard (Part 2)
-[* black] Detach the keyboard ribbon cable from the connector by gently pulling up on the long white collar to open the connector.
+[title] Remove Ribbon Cables
+[* black] Remove the two screws adjacent to the translucent cover.
+[* black] Peel back the translucent cover. Remove the two narrow white ribbon cables by gently pulling up on their collars to release the connector, and then sliding the ribbon cable out.
+[* black] Remove the metal cover held down by two screws. Remove the additional screw to the right of the cover. See second photo.
+[* black] Detach the keyboard ribbon cable from the connector by gently pulling up on the long white collar to open the connector. See third photo.
[* black] Detach the blue ribbon cable in the same manner.
[* black] Detach the white ribbon cable from the connector by gently pulling the gray connector collar toward you.
[* black] Detach the black display ribbon cable by gently pulling it straight up off the motherboard.

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Ninguna imagen anterior

Añadido