Repara tus cosas Comunidad Tienda

Cambios al paso #8

Editado por Sam Goldheart —

Edicion aprobada por Sam Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_note] When replacing the cover, pull out the AV/USB rubber cover. This makes it easier to put both of the case pieces back together.
-[* black] Replace the front cover first. Leave the bottom of the cover out at a bit of an angle, it makes it easier to attach the top fingers when you replace the back cover.
-[* black] To put the back cover on, start at the top and snap the three latches together. The cover screws can be replaced in any order you please.
+[* icon_reminder] When replacing the cover, pull out the AV/USB rubber cover. This makes it easier to put both of the case pieces back together.
+[* icon_reminder] Replace the front cover first. Leave the bottom of the cover out at a bit of an angle, it makes it easier to attach the top fingers when you replace the back cover.
+[* icon_reminder] To put the back cover on, start at the top and snap the three latches together. The cover screws can be replaced in any order you please.