Saltar al contenido principal

Cambios al paso #4

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the four T10 Torx screws securing the power supply to the rear case.
[* icon_note] The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.
[* black] Lift the power supply out of the rear case, minding the AC-in cable that may get caught.
[* icon_caution] Do not touch the face of the power supply board to avoid electric shock.