Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #3

Editado por pastavibes

Edicion rechazada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following seven screws:
[* red] Six 1.6 mm Phillips screws securing the trackpad to the upper case.
[* orange] One 1.4 mm T5T6 Torx set screw from its tapped hole near the front edge of the upper case.
[* orange] One 1.4 mm T5T6 Torx set screw from its tapped hole near the front edge of the upper case.
[* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.