Saltar al contenido principal

Cambios al paso #5

Editado por Francois P

Edicion rechazada por David Hodson

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the four recessed coarse-thread 7.5 mm T10 Torx screws securing the display to the rear case.
-[* icon_note] These screws are recessed, so a thin screwdriver such as [product|IF145-014|this] is essential for removal. Bit drivers tend to be too short for this application.
+[* icon_note] These screws are recessed, so a thin screwdriver such as [product|IF145-080|this] is essential for removal. Bit drivers tend to be too short for this application. You will probably need to [product|IF145-029|magnetize] the screwdriver to put back the screws in place later.