Saltar al contenido principal

Cambios al paso #4

Editado por Andrew Bookholt

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] Insert a plastic card up into the corner of the air vent slot at the top of the rear case.
[* black] Push the card toward the top of the iMac to release the front bezel latch.
+[* icon_note] It may take a few tries before the latch finally releases.
[* black] Pull the front bezel away from the rear case.
[* icon_note] Repeat this process for the other side of the front bezel.