Saltar al contenido principal

Cambios al paso #4

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

+[* icon_note] Re-orient your iMac so it sits upright on the stand.
[* black] Insert a plastic card up into the corner of the air vent slot at the top of the rear case.
[* black] Push the card toward the top of the iMac to release the front bezel latch.
-[* icon_note] It may take a few tries before the latch finally releases.
[* black] Pull the front bezel away from the rear case.
-[* icon_note] Repeat this process for the other side of the front bezel.
+[* black] Repeat this process for the other side of the front bezel.
+[* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
+[* icon_note] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process.

Imagen 3

Ninguna imagen anterior

Añadido