Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Adam Redmond

Edicion aprobada por Adam Redmond

Antes
Después
Sin cambios

Líneas de Paso

[* black] Using a soldering iron set at 400 degrees Celsius (752 degrees Fahrenheit), heat the solder joints lateral to the headphone jack. Use a pair of tweezers to lift the headphone jack from the board.
[* icon_caution] Extreme caution should be taken when working with high-temperature equipment to reduce the chance of burns.
[* icon_note] It is strongly recommended that [guide|750|this guide on desoldering surface-mounted components] is referenced before proceeding.