Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por macsveen —

Edicion rechazada por Jeff Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the following 12 screws securing the front bezel to the rear case:
[* red] Eight 13 mm T8 Torx.
[* orange] Four 25 mm T8 Torx.
-[* icon_note] On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).
+[* icon_note] On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), the two right and bottom corners are medium (18mm), and the remaining 6 (four top, two left) are short (14mm).