Cambios al paso #9
Editado por Henry Braden Fisk —
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] The back panel should now lift around 45 degrees from the back of the camera. | |
| [* black] CAUTION: Do not pull the back panel too far, it is connected to the top of the camera with ribbon cables and is not meant to separate from the camera. | |
| [* black] With the panel lifted, locate the larger ribbon cable connecting the LCD screen to the body of the camera. | |
| [* black] Grasp the cable near the connector and remove it. | |
| [* black] Note: This ribbon cable may be easier to remove using your hands instead of the tweezers. | |
| - | [* black] BRADEN AND CARLOS: This step is definitely going to need a step by step picture sequence with the back panel lifting up and locating/removing the final ribbon cable from the LCD. |