Saltar al contenido principal

Cambios al paso #2

Editado por Rahul Goyal

Edicion aprobada por Rahul Goyal

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the two rubber feet closest to the hinge using tweezers.
[* black] Remove the two Phillips #00 6mm screws that are under these rubber feet.
[* icon_note] It is difficult to prevent the rubber feet from slightly tearing while removing them. This is okay, as it won’t harm the laptop. If desired, these rubber feet can be replaced with new ones during reassembly.