Cambios al paso #3
Editado por Alex Larrimore —
Edicion aprobada por Alex Larrimore
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] To remove the back plate you will need to unscrew the support screws securing it to the camera | |
| - | [* black] There are [insert number of screws here] screws (pictured in this step) |
| - | [* black] Use the Phillips 00 screwdriver to remove them |
| + | [* black] There are 6 screws (pictured in this step) |
| + | [* black] 2 located on the bottom of the camera |
| + | [* black] 2 located on the right side next to the AV port |
| + | [* black] 2 located on the left side panel |
| + | [* black] Remove the screws using a Phillips 00 screwdriver |