Skip to main content

Changes to Step #2

Editado por mengler

Edicion aprobada por Andrew Optimus Goldheart

Borrada
Añadida
Sin cambios

Step Lines

[* black] Slide the inverter toward the edge of the mid-plane, then lift the it out of the iMac.
[* black] Slide the inverter toward the edge of the mid-plane, then lift the it out of the iMac.
[* icon_caution] Be careful to not pry up against the RAM brackets.
[* icon_reminder] When reinstalling the inverter, press the blue and white cables down in the edge of the midplane before lowering the inverter down into the midplane. The black cable can be routed near the hard drive thermal sensor cable.