Cambios al paso #3
Editado por Will Budney —
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] While depressing the connector lock, use a heavy duty spudger to pry the power supply connector away from its socket on the logic board. |
| [* icon_note] It will be necessary to work from alternate sides until the connector is free. |
| [* icon_caution] Your power supply may have an ambient light sensor cable attached from the power supply to the logic board. If so, carefully use a spudger to push out the cable towards you using the sides of the cable alternatively to help you slide it out. |
Imagen 3
Ninguna imagen anterior
Añadido