Cambios al paso #5
Editado por Flying Dutchman —
Edicion aprobada por Andrew Optimus Goldheart
- Eliminado
- Añadido
- Sin cambios
Líneas de Paso
| [* yellow] The large cylindrical object on the right side of the board is the flash capacitor. |
| [* icon_caution] '''WARNING: The flash capacitor may carry high voltage, that may persist for hours or even days after the camera has been switched off and/or the battery has been removed.''' |
| [* yellow] Touching the circuit board while the capacitor still holds its charge may result in a painful electric shock that you will long remember. |
| [* blue] To make the board safe to work on, short out the two marked terminals with the blade of a screwdriver or similar implement (with an insulated handle!) You might have to use moderate pressure to punch through the white goop that covers one of the terminals. |
| [* blue] There might be little sparks and/or an audible pop. Be careful not to short other solder connections nearby. |
| [* icon_caution] '''Use a multimeter to check that dangerous voltage is no longer present before you proceed.''' |
| [* red] Unsolder all of the wires on the top of the logic board. |
Imagen 1
Versión Antigua
Nueva Versión
Imagen 2
Versión Antigua
Nueva Versión