Saltar al contenido principal

Cambios al paso #1

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Push the 3 tabs at the top of the keyboard in and down one at a time using a prying tool.
+[* red] Push the 3 tabs at the top of the keyboard in and down one at a time using a nylon spudger.
[* orange] Once the three tabs have been pushed in, gently pry the top of the keyboard until it begins to hinge out of its slot.
[* icon_caution] The keyboard is still attached by a cable. Be careful when removing not to damage the cable. Do not yank the keyboard out.