Saltar al contenido principal

Cambios al paso #1

Editado por mir

Edicion aprobada por mir

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Locate all 3 tabs at the top of the keyboard.
-[* black] Push these tabs in and down (towards the table) and forward (towards the screen) one at a time using the metal spudger.
-[* black] Gently pry the top of the keyboard until it begins to hinge out of its slot.
+[* red] Push the 3 tabs at the top of the keyboard in and down one at a time using a prying tool.
+[* orange] Once the three tabs have been pushed in, gently pry the top of the keyboard until it begins to hinge out of its slot.
[* icon_caution] The keyboard is still attached by a cable. Be careful when removing not to damage the cable. Do not yank the keyboard out.