Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #6

Editado por Adam O'Camb

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[title] Re-Assembly (Continued)
[* black] Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split[https://d3nevzfk7ii3be.cloudfront.net/igi/V5WpCtdt5KFUuqXH|split|new_window=true] in the retainer down first. If you do not do this, the retainer may not seat properly, as shown in the first photo.
[* black] Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split[https://d3nevzfk7ii3be.cloudfront.net/igi/V5WpCtdt5KFUuqXH|split|new_window=true] in the retainer down first. If you do not do this, the retainer may not seat properly, as shown in the first photo.
[* black] If that happens, gently pry the bezel and retainer up by hand, re-seat the retainer in the bezel, and try again.
[* black] Once you have successfully replaced your bezel on the watch, it should feel like new and rotate freely again.