Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #6

Editado por David Olson

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[title] Re-Assembly (Continued)
[* black] Once you have the retainer seated in the bezel, place the bezel face down on your watch face with the split of the retainer touching down first. If you do not do this, you may end up with the problem pictured. If that happens, gently pry the bezel up by hand, re-seat the retainer in the bezel, and try again.
[* black] Once you have successfully replaced your bezel on the watch, it should feel like new and rotate freely again.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido