Saltar al contenido principal

Cambios al paso #1

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the following seven screws securing the logic board to the rear aluminum panel.
[* red] Six 2.1mm Phillips #00
[* icon_note] One of these screws, at the top of the logic board, is tucked beneath the headphone jack assembly cable. Take care to hold the cable out of the way while removing and replacing this screw.
[* orange] One 2.5mm Phillips #00