Saltar al contenido principal

Cambios a este Paso

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Using either your fingers or a spudger, peel back and remove the adhesive tape coveringDisconnect the following connectors from their respective sockets on the speaker andlogic board:
[* red] Wi-Fi
antenna connectorscable.
[* orange] Speaker connector cable.
[* yellow] Dock connector cable
.
[* black] With the tip of a spudger,icon_caution] Make sure to pry underneath the antenna connector off of itsand not the socket onitself. Prying the logic board.
[* black] In a similar manner, pry the speaker connect straight up, out of its
socket on the logic boarditself will cause severe damage.
[* black] Using either your fingers or a spudger, peel back and remove the adhesive tape coveringDisconnect the following connectors from their respective sockets on the speaker andlogic board:
[* red] Wi-Fi
antenna connectorscable.
[* orange] Speaker connector cable.
[* yellow] Dock connector cable
.
[* black] With the tip of a spudger,icon_caution] Make sure to pry underneath the antenna connector off of itsand not the socket onitself. Prying the logic board.
[* black] In a similar manner, pry the speaker connect straight up, out of its
socket on the logic boarditself will cause severe damage.

Imagen 1

Versión Antigua

Nueva Versión