Saltar al contenido principal

Cambios a este Paso

Editado por Brett Hartt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereUsing either your fingers or a spudger, peel back and remove the adhesive tape covering the speaker and antenna connectors.
[* black] With the tip of a spudger, pry the antenna connector off of its socket on the logic board.
[* black] In a similar manner, pry the speaker connect straight up, out of its socket on the logic board
.
[* black] Insert wisdom hereUsing either your fingers or a spudger, peel back and remove the adhesive tape covering the speaker and antenna connectors.
[* black] With the tip of a spudger, pry the antenna connector off of its socket on the logic board.
[* black] In a similar manner, pry the speaker connect straight up, out of its socket on the logic board
.

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Ninguna imagen anterior

Añadido