Saltar al contenido principal

Changes to Step #1

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereDisconnect the port hatch ribbon cable from the logic board by pulling it straight up by its black pull tab.
[* black] If necessary, pull the audio out ribbon cable off the adhesive securing it to the upper case
.
[* black] Insert wisdom hereDisconnect the port hatch ribbon cable from the logic board by pulling it straight up by its black pull tab.
[* black] If necessary, pull the audio out ribbon cable off the adhesive securing it to the upper case
.